PLEASE
TEST YOUR SYSTEMS MONTHLY
Be
prepared for the siren to go off. Then arm your
system. Wait your allotted delay time.
Walk
through your house and trip as many zones as you can
before disarming the system.
Call
the monitoring station and make sure they have received
the signals.
-
For
DSC Panels: Press *3 to view memory. # to
escape.
(See
quick reference manual) Arming
your system will remove memory light.
-
For
CADDX Panels: Flashing armed light indicates memory or
previous alarms.
-
For
ADEMCO Panels: Zones that were tripped will be
lit. Arming your system will remove memory
light
If
you ever have trouble disarming your system:
Press # (DSC & ADEMCO systems) * (CADDX systems) and
then re-enter your code.
IF
YOU HAVE A RUNAWAY ALARM/ SIREN FROM LIGHTNING STRIKE OR
POWER SURGE:
Locate
the transformer and the battery. Unplug the
transformer first and battery second.
Usually,
the transformer is located close to your security
panel. The transformer is a
square
box plugged directly into the electrical outlet. You
may need a Phillips head screwdriver to
remove the transformer. The battery is located
directly in the panel box.
Remove
the red and black wires from battery.
TELEPHONE
LINE PROBLEMS:
If
your alarm has seized your phone line or your phone is
inoperable, you can bypass the
telephone
line by unplugging it directly from the panel.
This
will need to be done before calling your phone service
provider.
Wait
five minutes and check phone line for dial tone. If you
have a Dial Tone,
Call
us for service 816.436.5398, otherwise call your phone
service provider.
